Changing the tyre of your car or vehicle is a daunting task in itself although changing the wheel is actually more challenging. The tasks actually turn out to be challenging and uphill especially if you have not tried your hands before. When you have already tried out the tasks a few times with your own hands, they become easy as you gain confidence in accomplishing those.
It always pays to be prepared for the worse. At times you could be in a situation where you have to accomplish the task of changing your car tyres on your own in order to be able to reach somewhere where you are safe and cosy. So it is always a good idea to master these skills beforehand and not wait until your back is pressed against the wall.
In the following sections of this post let us discuss how to change or replace a tyre to your car DIY. This will certainly help you cruise through unexpectedly difficult times rather easily.
How to change a tyre – few practical tips and tricks
Before get going with changing a tyre of your vehicle it is crucial that you assess your present situation. The things that you should assess include the following –
- You have stopped your vehicle in the best possible place
- The place is out of the way of other vehicles
- You are visible to other drivers coming your way
A trained and skilled mobile tyre fitting professional in Barnet says the most crucial thing for you to make out is whether changing the tyre at your current spot is safe for you from being run over by other motorists.
If and only if all the answers to the questions are yes then you should get out of your vehicle. But obviously before getting down from your car you have to remember to put the hazard lights on and pull the handbrake. It is also relevant placing a warning triangle behind your vehicle. If you are travelling with any co passenger, make sure they are out of the vehicle too along with you.
Each of these steps is crucial to ensure safety of all concerned. If any of the answers to the questions above is a no, then you have no better option but to manoeuvre your vehicle to a safer zone or spot.
Changing a tyre
Here is another round of cautiousness and taking stock of things before you proceed. Before laying your hands to dismantle the defective or flattened tyre you should make sure you have all the tools necessary to carry out the entire task. The entire task includes taking out the damaged tyre along with fitting the spare one in place. It should not so happen that you take the flat tyre off and find you do not have the necessary tools to fit the spare one in its place, warn trained and skilled professionals working in a renowned mobile tyre repair company in London. The tools that you require to execute the task smoothly include the following –
- A jack for your vehicle
- A wrench of proper size
- A wheel nut key
- A couple of wheel chocks
In addition to the typical tools mentioned above you may also need a torch if you have to execute the task at night. The manufacturer’s manual or handbook may also prove handy in such situations especially for those who do not possess much experience in changing tyres of their cars or vehicles. It is also important that you check the spare tyre to be in sound condition. Once you painstakingly fit the spare tyre to your vehicle only to found that it is not in a good condition to drive on brings no dividend whatsoever.
Now that everything is set and sure, you can proceed on changing the old damaged tyre of your car with the spare one.
Step 1 – the wheel chocks are meant to stabilise the vehicle
While you are jacking the vehicle up, it may go on a roll. Trained professionals who provide the service of mobile tyre fitting in Barnet suggest making use of the wheel chocks to prevent the car from rolling. Placement of wheel chocks is important; these must always be placed on the wheel that is diagonally opposite the tyre that is damaged.
For example, if the left front wheel is damaged, the chocks have to be placed on the rear right one, although you may also place one chock on the rear left one too. When you do not have chocks with you just place a sound piece of stone, a few pieces of brick or even a large plank of wood as suitable alternatives.
Step 2 – position the car jack properly
Every car is different and so at this point you may need consulting the manufacturer’s manual of your vehicle to make out the best position to place the jack. However, if cannot find the information in the manual, in that case place it in the lifting point that is closest to the wheel you are about to change. Make sure that head engages properly as it should; keep extending the jack slowly until the vehicle has slightly risen but its wheels are still on the ground.
Step 3 – Slowly loosen up the wheel nuts
Mobile Tyre repair technician, who deal with tyres in Barnet and help people like you with removing flat tyres and fitting new tyres to cars and vehicles, suggest you should have the wheel nuts loosened when the tyres are still on the ground surface. The wheel wrench proves helpful getting this part of the task done easily. While working with a wrench always keep in mind that righty tighty and lefty loosey. So, when you turn the wrench on the left, the bolt or screws become loose and vice versa.
It is possible that applying pressure on the wrench with your hands may not loosen the nuts. In that case you should apply pressure on the wrench using your foot. When a nut is sufficiently loose so that you can take it out by your hand, just leave it stay there in its place and start working on the next bolt. Once you take out the nut completely, that exerts pressure on the other nuts and thus removing those often proves more challenging.
In the next steps you have to jack the vehicle up till the tyres are at least above 10 cm from the ground. Take out the flat wheel and fit the spare one in place, suggest mobile mechanics working in a renowned tyre shop in Barnet. Make sure the wheel nuts are fully tightened and then slowly lower the vehicle back on the ground. Congratulations! Your job is done.
Also read: https: https://dailystorypro.com/emergency-dentist-appointment/
