If your Lloyd inverter AC has suddenly stopped cooling, is showing an error, or the outdoor unit is not starting, the outdoor PCB could be one of the components causing the problem. The PCB, or Printed Circuit Board, works like the control center of the outdoor unit. It manages important functions such as compressor operation, communication, power control, and other electronic components.
One of the first questions homeowners usually ask is, “How much will a replacement PCB cost?” The answer depends on the AC model, PCB code, board manufacturer, availability, and whether you need an original or compatible replacement.
Current listings show that Lloyd inverter AC outdoor PCBs can vary considerably in price. For example, one Lloyd 1.5-ton inverter outdoor PCB is listed at ₹4,500, while another original 1.5-ton/tr split AC PCB is listed at ₹6,500.
If you want to check the latest product-specific pricing and models, you can refer to the Lloyd inverter AC outdoor PCB price guide before making a purchase.
What Is an Outdoor PCB in a Lloyd Inverter AC?
The outdoor PCB is an electronic control board installed inside the outdoor unit of your air conditioner. In an inverter AC, it has an especially important job because the compressor does not simply switch on and off like a conventional fixed-speed system.
The board helps control the inverter system and communicates with other parts of the AC. If the PCB develops a serious fault, the outdoor unit may fail to operate properly even when the indoor unit appears to be working.
However, a common mistake is to assume that every outdoor AC problem is caused by the PCB. Faulty sensors, wiring, power supply problems, communication issues, capacitors, or other components can sometimes create similar symptoms.
That is why proper diagnosis is important before purchasing an expensive replacement board.
How Much Does a Lloyd Inverter AC Outdoor PCB Cost?
There is no single price that applies to every Lloyd inverter AC. The cost depends largely on the exact model and PCB code.
Based on currently available listings, you may find Lloyd outdoor inverter PCBs around the ₹4,500 to ₹6,500 range for certain models. Other boards or versions can cost more depending on specifications and availability. For comparison, one supplier currently lists Lloyd inverter outdoor PCB options at ₹6,500, while another listing shows a Lloyd inverter AC PCB at approximately ₹4,500.
These figures should be treated as indicative rather than a fixed replacement price. The final expense can also include technician inspection, installation, transportation, and other service charges.
Why Do PCB Prices Vary?
You may notice a significant difference between two boards that appear to perform a similar function. There are several reasons for this.
First, different Lloyd AC models use different PCB designs. A board made for one 1.5-ton inverter model may not work with another 1.5-ton model.
Second, the PCB manufacturer and component quality can affect pricing. Some replacement boards are supplied by original equipment manufacturers, while others are compatible aftermarket boards.
The board’s code and revision are also important. Even if the AC capacity is the same, two outdoor units may require different PCB versions.
For example, a currently listed Lloyd 1.5-ton outdoor board carries the model number MITE50HV-3S-19 and is manufactured by MEGMEET. The listing also provides additional board and component codes for compatibility checking.
How Can You Tell If the Outdoor PCB Is Faulty?
There are several symptoms that may indicate a PCB problem, although these symptoms alone do not confirm that the board needs replacement.
Your AC may show an error code, fail to start the outdoor unit, repeatedly stop during operation, or have communication problems between the indoor and outdoor units.
In some cases, the indoor unit switches on normally but the compressor does not start. You might also notice abnormal outdoor-unit operation or repeated electrical protection trips.
The important point is not to replace the PCB based only on one symptom. A qualified technician should test the relevant electrical and electronic components first.
Should You Repair or Replace the PCB?
This depends on the condition of the board.
If the PCB has a minor component-level fault, a specialist may be able to repair it. Repair can sometimes be less expensive than buying a complete replacement.
On the other hand, extensive damage caused by voltage fluctuations, burnt components, moisture, or a serious circuit failure may make replacement more practical.
The decision should also consider the age of the AC. If the unit is relatively new and the correct original board is available, replacement may be straightforward. For an older AC, comparing repair and replacement costs can make more sense.
Always Check the PCB Code Before Buying
This is probably the most important step when ordering a replacement.
Do not select a board simply because the seller says it is for a “Lloyd 1.5-ton inverter AC.” Check the exact AC model, outdoor-unit model, PCB number, revision, connector arrangement, and other identifying information.
A current product listing specifically recommends matching the part number and board code with the existing PCB before purchasing. It also notes that different old and new PCB versions may exist.
Taking a clear photograph of the existing PCB label can make the identification process much easier.
What About Installation?
Replacing an inverter AC outdoor PCB is not the same as changing a simple electrical component. The outdoor unit contains high-voltage electrical components, and incorrect installation can damage the replacement board or other parts.
For this reason, PCB installation should be handled by a qualified AC technician. The technician should also identify why the original board failed. Otherwise, installing a new board without addressing an underlying electrical problem could result in another failure.
Final Thoughts
The cost of a Lloyd inverter AC outdoor PCB depends on the exact model, board code, manufacturer, availability, and type of replacement you choose. As current listings demonstrate, some boards are available around ₹4,500, while specific original models can reach ₹6,500 or more.
Before spending money on a replacement, get the outdoor unit properly diagnosed and confirm the PCB code. A small amount of checking beforehand can prevent you from purchasing an incompatible board.
Most importantly, don’t judge the fault only by the AC’s symptoms. A PCB problem can look similar to several other electrical or component-level issues. Getting the right diagnosis first can save both time and money while helping your Lloyd inverter AC get back to reliable cooling.
